Atherton & District Amateur Photographic Society

A couple of points to add to that. When dragging an image into the black canvas, holding down the Shift key whilse you do it will make sure the image is centred left-to-right.
After dragging in the image, don't forget to Flatten before saving.
Hope that helps! Any questions, please ask....

John

Quick question with regards to print preoparation, I received some prints back from the Colour Labs however the prints did not match my monito have done as they ask on the website and downloaded Fuji's colour conversion profile, the question is when do apply the profile at the very beginning before any adjustments to the photo or after all adjustments etc have been made?

Alison if you follow this link it is explained here:

http://www.dscolourlabs.co.uk/quality_advice.cfm

Been there, done that.

Make sure you CONVERT to profile and NOT Assign profile
The latter will totally screw up the colours.

Theo

Hi John

This is an excellent "how to do it" article. I look forward to more like this.

Cheers

Mel

It needs noting that the address for e-mailing images to is now Keith Richardson's, so that's compsec.adaps@gmail.com

The size requirement has now been altered and images should be 1600 x 1200 pixels. The rest of the information remains valid.